URL slug: /cost-guides/fence-cost-seattle/ Target keywords: fence cost Seattle | wood fence vs vinyl fence cost | fence installation King County | how much does a fence cost in Seattle

Fence costs vary more than almost any other home improvement project — the material you choose, the linear footage, and your site conditions all play a major role. Here’s a straightforward breakdown of the four main fence material options for Seattle-area homeowners.

Fence Cost by Material — King County

All prices are installed cost per linear foot by a licensed contractor, including posts, concrete, hardware, and gates (one gate per 100 LF).

Prices for King County / Seattle metro. Fence dimensions are measured as the sum of all linear runs — not perimeter.

Cedar Fence

Cedar is the most common fence material in western Washington for good reason: it’s locally available, handles moisture well, and looks natural. Western red cedar is naturally rot-resistant without chemical treatment.

Pros: Natural appearance, locally sourced, good moisture resistance, easy to paint or stain Cons: Requires maintenance (staining or sealing every 3–5 years), can warp or check over time Lifespan: 15–20 years with maintenance, 10–12 years without

Vinyl / PVC Fence

Vinyl fencing requires no painting or staining — a hose rinse is all it needs. It’s popular for homeowners who want a maintenance-free solution.

Pros: Zero maintenance, won’t rot or splinter, consistent color Cons: More expensive upfront than cedar, can yellow or become brittle in UV, not as structurally rigid for longer spans Lifespan: 20–30 years

Aluminum Fence

Aluminum is the go-to for ornamental fencing — the picket and wrought-iron look without the rust. It’s not a privacy fence, but it’s ideal for pool enclosures, front yard delineation, and aesthetic property lines.

Pros: Rust-proof, lightweight, low maintenance, clean modern look Cons: Not a privacy option, can dent, higher cost than cedar Lifespan: 30–40 years

Composite Fence (Trex Seclusions)

Trex Seclusions composite fencing uses the same material as composite decking — recycled wood and plastic. It has the natural look of wood with minimal maintenance.

Pros: Looks like wood, won’t rot or splinter, consistent color, 25-year warranty Cons: Highest upfront cost, heavier posts required Lifespan: 25+ years

What Affects Fence Cost Most?

Beyond material choice, these factors move the number significantly:

• Site conditions: Rocky or root-filled soil requires hand-digging or rock bits — adds $8–$15/LF
• Slope: A sloped yard requires stepped or racked fence panels — adds $5–$12/LF
• Demo and haul-away: Removing an existing fence adds $4–$8/LF
• Gates: Single walk gates run $350–$650 each; double drive gates $800–$1,500

Get a fence estimate from Prolific →

Schema Markup

{
  "@context": "https://schema.org",
  "@type": "FAQPage",
  "mainEntity": [
    {
      "@type": "Question",
      "name": "How much does a cedar fence cost in Seattle?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "A 6-foot cedar privacy fence in King County costs $38–$58 per linear foot installed, including posts, concrete, and hardware. A typical 150 linear foot project runs $5,700–$8,700."
      }
    },
    {
      "@type": "Question",
      "name": "How is fence length measured?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "Fence length is measured as the sum of all linear runs — not the perimeter of the property. If you have a 60-foot back fence and two 45-foot side fences, the total is 150 linear feet."
      }
    },
    {
      "@type": "Question",
      "name": "What is the cheapest fence option in Seattle?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "Pressure-treated pine is the lowest-cost option at $32–$50 per linear foot installed. Cedar is slightly more expensive but significantly more rot-resistant for the Pacific Northwest climate."
      }
    }
  ]
}